SolutionUserObject

Reads a variable from a mesh in one simulation to another

Description

A solution user object reads a variable from a mesh in one simulation to another. In order to use a SolutionUserObject three additional parameters are required, an AuxVariable , a Function and an AuxKernel. The AuxVariable represents the variable to be read by the solution user object. The SolutionUserObject is set up to read the old output file. A SolutionFunction is required to interpolate in time and space the data from the SolutionUserObject. Finally, the Function is required that will query the function and write the value into the AuxVariable.

Example Input Syntax


[UserObjects]
  [./soln]
    type = SolutionUserObject
    mesh = cubesource.e
    system_variables = source_nodal
  [../]
[]
(moose/test/tests/auxkernels/solution_aux/solution_aux_exodus_interp.i)

Input Parameters

  • meshThe name of the mesh file (must be xda or exodusII file).

    C++ Type:MeshFileName

    Description:The name of the mesh file (must be xda or exodusII file).

Required Parameters

  • scale1 1 1 Scale factor for points in the simulation

    Default:1 1 1

    C++ Type:std::vector

    Description:Scale factor for points in the simulation

  • scale_multiplier1 1 1 Scale multiplying factor for points in the simulation

    Default:1 1 1

    C++ Type:std::vector

    Description:Scale multiplying factor for points in the simulation

  • rotation1_vector0 0 1Vector about which to rotate points of the simulation.

    Default:0 0 1

    C++ Type:libMesh::VectorValue

    Description:Vector about which to rotate points of the simulation.

  • rotation1_angle0Anticlockwise rotation angle (in degrees) to use for rotation about rotation1_vector.

    Default:0

    C++ Type:double

    Description:Anticlockwise rotation angle (in degrees) to use for rotation about rotation1_vector.

  • timestepIndex of the single timestep used or "LATEST" for the last timestep (exodusII only). If not supplied, time interpolation will occur.

    C++ Type:std::string

    Description:Index of the single timestep used or "LATEST" for the last timestep (exodusII only). If not supplied, time interpolation will occur.

  • transformation_ordertranslation scaleThe order to perform the operations in. Define R0 to be the rotation matrix encoded by rotation0_vector and rotation0_angle. Similarly for R1. Denote the scale by s, the scale_multiplier by m, and the translation by t. Then, given a point x in the simulation, if transformation_order = 'rotation0 scale_multiplier translation scale rotation1' then form p = R1*(R0*x*m - t)/s. Then the values provided by the SolutionUserObject at point x in the simulation are the variable values at point p in the mesh.

    Default:translation scale

    C++ Type:MultiMooseEnum

    Description:The order to perform the operations in. Define R0 to be the rotation matrix encoded by rotation0_vector and rotation0_angle. Similarly for R1. Denote the scale by s, the scale_multiplier by m, and the translation by t. Then, given a point x in the simulation, if transformation_order = 'rotation0 scale_multiplier translation scale rotation1' then form p = R1*(R0*x*m - t)/s. Then the values provided by the SolutionUserObject at point x in the simulation are the variable values at point p in the mesh.

  • systemnl0The name of the system to pull values out of (xda only).

    Default:nl0

    C++ Type:std::string

    Description:The name of the system to pull values out of (xda only).

  • system_variablesThe name of the nodal and elemental variables from the file you want to use for values

    C++ Type:std::vector

    Description:The name of the nodal and elemental variables from the file you want to use for values

  • rotation0_angle0Anticlockwise rotation angle (in degrees) to use for rotation about rotation0_vector.

    Default:0

    C++ Type:double

    Description:Anticlockwise rotation angle (in degrees) to use for rotation about rotation0_vector.

  • execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.

    Default:TIMESTEP_END

    C++ Type:ExecFlagEnum

    Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.

  • translation0 0 0 Translation factors for x,y,z coordinates of the simulation

    Default:0 0 0

    C++ Type:std::vector

    Description:Translation factors for x,y,z coordinates of the simulation

  • rotation0_vector0 0 1Vector about which to rotate points of the simulation.

    Default:0 0 1

    C++ Type:libMesh::VectorValue

    Description:Vector about which to rotate points of the simulation.

  • esThe name of the file holding the equation system info in xda format (xda only).

    Default:

    C++ Type:FileName

    Description:The name of the file holding the equation system info in xda format (xda only).

Optional Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Description:Set the enabled status of the MooseObject.

  • allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

    Default:False

    C++ Type:bool

    Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

  • force_preauxFalseForces the GeneralUserObject to be executed in PREAUX

    Default:False

    C++ Type:bool

    Description:Forces the GeneralUserObject to be executed in PREAUX

Advanced Parameters