# Side Average Value Layered1D

Computes the average value of a variable on a sideset. Note that this cannot be used on the centerline of an axisymmetric model.

## Description

SideAverageValueLayered1D calculates the average value of a variable on sideset for the case of Layered1D. For the integration along the slice/layer stacking direction, it uses the constant slice_height for each slice/layer fetched from Layered1DFuelPinGeometry object.

(1) where is the global average value computed by this postprocessor, is the layer index, is the height of layer , and is the value of the variable on the sideset in layer , which has a single value for a given layer because it is a value at a point.

## Example Input Syntax

[./ave_temp]
type = SideAverageValueLayered1D
boundary = 2
variable = temp
execute_on = timestep_end
fuel_pin_geometry = pin_geometry
[../]
(test/tests/layered_1D/side_average_value.i)

## Input Parameters

• variableThe name of the variable that this boundary condition applies to

C++ Type:std::vector

Description:The name of the variable that this boundary condition applies to

• boundaryThe list of boundary IDs from the mesh where this boundary condition applies

C++ Type:std::vector

Description:The list of boundary IDs from the mesh where this boundary condition applies

• fuel_pin_geometryName of Layered1DFuelPinGeometry UserObject

C++ Type:UserObjectName

Description:Name of Layered1DFuelPinGeometry UserObject

### Required Parameters

• execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.

Default:TIMESTEP_END

C++ Type:ExecFlagEnum

Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.

### Optional Parameters

• control_tagsAdds user-defined labels for accessing object parameters via control logic.

C++ Type:std::vector

Description:Adds user-defined labels for accessing object parameters via control logic.

• enableTrueSet the enabled status of the MooseObject.

Default:True

C++ Type:bool

Description:Set the enabled status of the MooseObject.

• allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

Default:False

C++ Type:bool

Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

• use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Default:False

C++ Type:bool

Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

• outputsVector of output names were you would like to restrict the output of variables(s) associated with this object

C++ Type:std::vector

Description:Vector of output names were you would like to restrict the output of variables(s) associated with this object