NodalVariableValue

Outputs values of a nodal variable at a particular location

Description

In order to obtain the value of a nodal variable at a particular location (i.e., temperature and displacement) a NodalVariableValue postprocessor is used. For example, this postprocessor is useful for obtaining the centerline temperature at the location of a thermocouple to compare against experimental data.

Example Input Syntax


[Postprocessors]
  [./off_block]
    type = NodalVariableValue
    variable = v
    nodeid = 0
  [../]
[]
(moose/test/tests/misc/check_error/nodal_value_off_block.i)

Input Parameters

  • variableThe variable to be monitored

    C++ Type:VariableName

    Description:The variable to be monitored

  • nodeidThe ID of the node where we monitor

    C++ Type:unsigned int

    Description:The ID of the node where we monitor

Required Parameters

  • execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.

    Default:TIMESTEP_END

    C++ Type:ExecFlagEnum

    Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.

  • scale_factor1A scale factor to be applied to the variable

    Default:1

    C++ Type:double

    Description:A scale factor to be applied to the variable

Optional Parameters

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Description:Set the enabled status of the MooseObject.

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

  • outputsVector of output names were you would like to restrict the output of variables(s) associated with this object

    C++ Type:std::vector

    Description:Vector of output names were you would like to restrict the output of variables(s) associated with this object

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

    Default:False

    C++ Type:bool

    Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

  • force_preauxFalseForces the GeneralUserObject to be executed in PREAUX

    Default:False

    C++ Type:bool

    Description:Forces the GeneralUserObject to be executed in PREAUX

Advanced Parameters