Nicrofer3033 Thermal Expansion Eigenstrain

Calculates eigenstrain due to linear thermal expansion in Nicrofer3033, or Alloy 33, cladding using a constant thermal expansion coefficient

Description

This class calculates strain due to thermal expansion for the Nicrofer3033 cladding material. Nicrofer3033, also known as Alloy 33, is a face-centered cubic austenitic steel with 0.4% N, 31% Ni, and 33% Cr. With data from the IFR Property Evaluation Working Group (1988) and the Material Data Sheet No. 4042, this class calculates the linear thermal expansion as: (1) where is the current temperature (K) and is the stress free temperature (K).

The Material Data Sheet No. 4042 gives the approved operating temperature range for this material in pressure vessel applications as 77 K to 723 K.

Example Input Syntax


[./thermal_expansion]
  type = Nicrofer3033ThermalExpansionEigenstrain
  temperature = temperature
  stress_free_temperature = 200.0
  eigenstrain_name = thermal_expansion
[../]
(test/tests/tensor_mechanics/nicrofer3033_mechanics/thermal_expansion_nicrofer3033.i)

The eigenstrain_name parameter value must also be set for the strain calculator, and an example parameter setting in the Tensor Mechanics Master Action is shown below:


[Modules]
  [./TensorMechanics]
    [./Master]
      [./all]
        strain = SMALL
        incremental = true
        add_variables = true
        eigenstrain_names = 'thermal_expansion'
        generate_output = 'strain_yy strain_xx strain_zz'
      [../]
    [../]
  [../]
[]
(test/tests/tensor_mechanics/nicrofer3033_mechanics/thermal_expansion_nicrofer3033.i)

Input Parameters

  • stress_free_temperatureReference temperature at which there is no thermal expansion for thermal eigenstrain calculation

    C++ Type:std::vector

    Description:Reference temperature at which there is no thermal expansion for thermal eigenstrain calculation

  • eigenstrain_nameMaterial property name for the eigenstrain tensor computed by this model. IMPORTANT: The name of this property must also be provided to the strain calculator.

    C++ Type:std::string

    Description:Material property name for the eigenstrain tensor computed by this model. IMPORTANT: The name of this property must also be provided to the strain calculator.

Required Parameters

  • computeTrueWhen false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the Material via MaterialPropertyInterface::getMaterial(). Non-computed Materials are not sorted for dependencies.

    Default:True

    C++ Type:bool

    Description:When false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the Material via MaterialPropertyInterface::getMaterial(). Non-computed Materials are not sorted for dependencies.

  • temperatureCoupled temperature

    C++ Type:std::vector

    Description:Coupled temperature

  • base_nameOptional parameter that allows the user to define multiple mechanics material systems on the same block, i.e. for multiple phases

    C++ Type:std::string

    Description:Optional parameter that allows the user to define multiple mechanics material systems on the same block, i.e. for multiple phases

  • boundaryThe list of boundary IDs from the mesh where this boundary condition applies

    C++ Type:std::vector

    Description:The list of boundary IDs from the mesh where this boundary condition applies

  • blockThe list of block ids (SubdomainID) that this object will be applied

    C++ Type:std::vector

    Description:The list of block ids (SubdomainID) that this object will be applied

Optional Parameters

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Description:Set the enabled status of the MooseObject.

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • seed0The seed for the master random number generator

    Default:0

    C++ Type:unsigned int

    Description:The seed for the master random number generator

  • implicitTrueDetermines whether this object is calculated using an implicit or explicit form

    Default:True

    C++ Type:bool

    Description:Determines whether this object is calculated using an implicit or explicit form

  • constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeSubdomainProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped

    Default:NONE

    C++ Type:MooseEnum

    Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeSubdomainProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped

Advanced Parameters

  • output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)

    C++ Type:std::vector

    Description:List of material properties, from this material, to output (outputs must also be defined to an output type)

  • outputsnone Vector of output names were you would like to restrict the output of variables(s) associated with this object

    Default:none

    C++ Type:std::vector

    Description:Vector of output names were you would like to restrict the output of variables(s) associated with this object

Outputs Parameters

Input Files

References

  1. Compiled by: IFR Property Evaluation Working Group. Metallic fuels handbook. Argonne National Laboratory, June 1988.[BibTeX]