FiniteStrainUObasedCP

under construction:Undocumented Class

The FiniteStrainUObasedCP has not been documented, if you would like to contribute to MOOSE by writing documentation, please see Documenting MOOSE. The content contained on this page explains the typical documentation associated with a MooseObject; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.

Crystal Plasticity base class: FCC system with power law flow rule implemented

Input Parameters

  • uo_slip_ratesList of names of user objects that define the slip rates for this material.

    C++ Type:std::vector

    Description:List of names of user objects that define the slip rates for this material.

  • uo_slip_resistancesList of names of user objects that define the slip resistances for this material.

    C++ Type:std::vector

    Description:List of names of user objects that define the slip resistances for this material.

  • uo_state_var_evol_rate_compsList of names of user objects that define the state variable evolution rate components for this material.

    C++ Type:std::vector

    Description:List of names of user objects that define the state variable evolution rate components for this material.

  • uo_state_varsList of names of user objects that define the state variable for this material.

    C++ Type:std::vector

    Description:List of names of user objects that define the state variable for this material.

Required Parameters

  • rtol1e-06Constitutive stress residue relative tolerance

    Default:1e-06

    C++ Type:double

    Description:Constitutive stress residue relative tolerance

  • min_line_search_step_size0.01Minimum line search step size

    Default:0.01

    C++ Type:double

    Description:Minimum line search step size

  • computeTrueWhen false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the Material via MaterialPropertyInterface::getMaterial(). Non-computed Materials are not sorted for dependencies.

    Default:True

    C++ Type:bool

    Description:When false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the Material via MaterialPropertyInterface::getMaterial(). Non-computed Materials are not sorted for dependencies.

  • maximum_substep_iteration1Maximum number of substep iteration

    Default:1

    C++ Type:unsigned int

    Description:Maximum number of substep iteration

  • base_nameOptional parameter that allows the user to define multiple mechanics material systems on the same block, i.e. for multiple phases

    C++ Type:std::string

    Description:Optional parameter that allows the user to define multiple mechanics material systems on the same block, i.e. for multiple phases

  • abs_tol1e-06Constitutive stress residue absolute tolerance

    Default:1e-06

    C++ Type:double

    Description:Constitutive stress residue absolute tolerance

  • line_search_tol0.5Line search bisection method tolerance

    Default:0.5

    C++ Type:double

    Description:Line search bisection method tolerance

  • use_line_searchFalseUse line search in constitutive update

    Default:False

    C++ Type:bool

    Description:Use line search in constitutive update

  • stol0.01Constitutive slip system resistance relative residual tolerance

    Default:0.01

    C++ Type:double

    Description:Constitutive slip system resistance relative residual tolerance

  • line_search_maxiter20Line search bisection method maximum number of iteration

    Default:20

    C++ Type:unsigned int

    Description:Line search bisection method maximum number of iteration

  • maxiter_state_variable100Maximum number of iterations for state variable update

    Default:100

    C++ Type:unsigned int

    Description:Maximum number of iterations for state variable update

  • zero_tol1e-12Tolerance for residual check when variable value is zero

    Default:1e-12

    C++ Type:double

    Description:Tolerance for residual check when variable value is zero

  • maxiter100Maximum number of iterations for stress update

    Default:100

    C++ Type:unsigned int

    Description:Maximum number of iterations for stress update

  • line_search_methodCUT_HALFThe method used in line search

    Default:CUT_HALF

    C++ Type:MooseEnum

    Description:The method used in line search

  • boundaryThe list of boundary IDs from the mesh where this boundary condition applies

    C++ Type:std::vector

    Description:The list of boundary IDs from the mesh where this boundary condition applies

  • tan_mod_typenoneType of tangent moduli for preconditioner: default elastic

    Default:none

    C++ Type:MooseEnum

    Description:Type of tangent moduli for preconditioner: default elastic

  • store_stress_oldFalseParameter which indicates whether the old stress state, required for the HHT time integration scheme and Rayleigh damping, needs to be stored

    Default:False

    C++ Type:bool

    Description:Parameter which indicates whether the old stress state, required for the HHT time integration scheme and Rayleigh damping, needs to be stored

  • blockThe list of block ids (SubdomainID) that this object will be applied

    C++ Type:std::vector

    Description:The list of block ids (SubdomainID) that this object will be applied

Optional Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Description:Set the enabled status of the MooseObject.

  • seed0The seed for the master random number generator

    Default:0

    C++ Type:unsigned int

    Description:The seed for the master random number generator

  • implicitTrueDetermines whether this object is calculated using an implicit or explicit form

    Default:True

    C++ Type:bool

    Description:Determines whether this object is calculated using an implicit or explicit form

  • constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeSubdomainProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped

    Default:NONE

    C++ Type:MooseEnum

    Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeSubdomainProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped

Advanced Parameters

  • output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)

    C++ Type:std::vector

    Description:List of material properties, from this material, to output (outputs must also be defined to an output type)

  • outputsnone Vector of output names were you would like to restrict the output of variables(s) associated with this object

    Default:none

    C++ Type:std::vector

    Description:Vector of output names were you would like to restrict the output of variables(s) associated with this object

Outputs Parameters

References