REBEKA Dirichlet BC

!syntax description /BCs/REBEKADirichletBC

under construction:Undocumented Class

This class has not been documented, if you would like to contribute to MOOSE by writing documentation, please see Documenting MOOSE. The content contained on this page explains the typical documentation associated with a MooseObject; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.

Input Parameters

  • variableThe name of the variable that this boundary condition applies to

    C++ Type:NonlinearVariableName

    Description:The name of the variable that this boundary condition applies to

  • boundaryThe list of boundary IDs from the mesh where this boundary condition applies

    C++ Type:std::vector

    Description:The list of boundary IDs from the mesh where this boundary condition applies

  • function_tempmFunction for the peak temperature vs time

    C++ Type:FunctionName

    Description:Function for the peak temperature vs time

Required Parameters

  • save_inThe name of auxiliary variables to save this BC's residual contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)

    C++ Type:std::vector

    Description:The name of auxiliary variables to save this BC's residual contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)

  • vary_azimuthallyFalsefor 3D problems if the bc is to vary azimuthally

    Default:False

    C++ Type:bool

    Description:for 3D problems if the bc is to vary azimuthally

  • minimum_temperature0Minimum temperature considered (K)

    Default:0

    C++ Type:double

    Description:Minimum temperature considered (K)

  • diag_save_inThe name of auxiliary variables to save this BC's diagonal jacobian contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)

    C++ Type:std::vector

    Description:The name of auxiliary variables to save this BC's diagonal jacobian contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)

  • translation0Translation along the y-axis (m)

    Default:0

    C++ Type:double

    Description:Translation along the y-axis (m)

  • azimuthal_variation_pi20Azimuthal variation factor across a pi/2 angle

    Default:0

    C++ Type:double

    Description:Azimuthal variation factor across a pi/2 angle

Optional Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Description:Set the enabled status of the MooseObject.

  • seed0The seed for the master random number generator

    Default:0

    C++ Type:unsigned int

    Description:The seed for the master random number generator

  • implicitTrueDetermines whether this object is calculated using an implicit or explicit form

    Default:True

    C++ Type:bool

    Description:Determines whether this object is calculated using an implicit or explicit form

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

  • vector_tagsresidualThe tag for the vectors this Kernel should fill

    Default:residual

    C++ Type:MultiMooseEnum

    Description:The tag for the vectors this Kernel should fill

  • extra_vector_tagsThe extra tags for the vectors this Kernel should fill

    C++ Type:std::vector

    Description:The extra tags for the vectors this Kernel should fill

  • matrix_tagssystem timeThe tag for the matrices this Kernel should fill

    Default:system time

    C++ Type:MultiMooseEnum

    Description:The tag for the matrices this Kernel should fill

  • extra_matrix_tagsThe extra tags for the matrices this Kernel should fill

    C++ Type:std::vector

    Description:The extra tags for the matrices this Kernel should fill

Tagging Parameters

Input Files