ThermalContactLWRAuxBCsAction

under construction:Undocumented Class

The ThermalContactLWRAuxBCsAction has not been documented, if you would like to contribute to MOOSE by writing documentation, please see Documenting MOOSE. The content contained on this page explains the typical documentation associated with an action; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.

!syntax description /ThermalContact/ThermalContactLWRAuxBCsAction

Input Parameters

  • variableThe variable for thermal contact

    C++ Type:NonlinearVariableName

    Description:The variable for thermal contact

  • slaveThe slave surface

    C++ Type:BoundaryName

    Description:The slave surface

  • masterThe master surface

    C++ Type:BoundaryName

    Description:The master surface

Required Parameters

  • conductivity_namethermal_conductivityThe name of the MaterialProperty associated with conductivity ("thermal_conductivity" in the case of heat conduction)

    Default:thermal_conductivity

    C++ Type:std::string

    Description:The name of the MaterialProperty associated with conductivity ("thermal_conductivity" in the case of heat conduction)

  • tangential_toleranceTangential distance to extend edges of contact surfaces

    C++ Type:double

    Description:Tangential distance to extend edges of contact surfaces

  • warningsFalseWhether to output warning messages concerning nodes not being found

    Default:False

    C++ Type:bool

    Description:Whether to output warning messages concerning nodes not being found

  • quadratureFalseWhether or not to use quadrature point based gap heat transfer

    Default:False

    C++ Type:bool

    Description:Whether or not to use quadrature point based gap heat transfer

  • orderFIRSTThe finite element order

    Default:FIRST

    C++ Type:MooseEnum

    Description:The finite element order

  • normal_smoothing_methodMethod to use to smooth normals (edge_based|nodal_normal_based)

    C++ Type:std::string

    Description:Method to use to smooth normals (edge_based|nodal_normal_based)

  • conductivity_master_namethermal_conductivityThe name of the MaterialProperty associated with conductivity ("thermal_conductivity" in the case of heat conduction)

    Default:thermal_conductivity

    C++ Type:std::string

    Description:The name of the MaterialProperty associated with conductivity ("thermal_conductivity" in the case of heat conduction)

  • inactiveIf specified blocks matching these identifiers will be skipped.

    C++ Type:std::vector

    Description:If specified blocks matching these identifiers will be skipped.

  • active__all__ If specified only the blocks named will be visited and made active

    Default:__all__

    C++ Type:std::vector

    Description:If specified only the blocks named will be visited and made active

  • gap_typeGapValueAuxA string representing the Moose object that will be used for computing the gap size

    Default:GapValueAux

    C++ Type:std::string

    Description:A string representing the Moose object that will be used for computing the gap size

  • normal_smoothing_distanceDistance from edge in parametric coordinates over which to smooth contact normal

    C++ Type:double

    Description:Distance from edge in parametric coordinates over which to smooth contact normal

Optional Parameters

References