ThermalContactBCsAction

under construction:Undocumented Class

The ThermalContactBCsAction has not been documented, if you would like to contribute to MOOSE by writing documentation, please see Documenting MOOSE. The content contained on this page explains the typical documentation associated with an action; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.

!syntax description /ThermalContact/ThermalContactBCsAction

Input Parameters

  • variableThe variable for thermal contact

    C++ Type:NonlinearVariableName

    Description:The variable for thermal contact

  • slaveThe slave surface

    C++ Type:BoundaryName

    Description:The slave surface

  • masterThe master surface

    C++ Type:BoundaryName

    Description:The master surface

Required Parameters

  • gap_geometry_typeGap calculation type.

    C++ Type:MooseEnum

    Description:Gap calculation type.

  • save_inThe Auxiliary Variable to (optionally) save the boundary flux in

    C++ Type:std::vector

    Description:The Auxiliary Variable to (optionally) save the boundary flux in

  • disp_zThe z displacement

    C++ Type:std::vector

    Description:The z displacement

  • disp_yThe y displacement

    C++ Type:std::vector

    Description:The y displacement

  • disp_xThe x displacement

    C++ Type:std::vector

    Description:The x displacement

  • warningsFalseWhether to output warning messages concerning nodes not being found

    Default:False

    C++ Type:bool

    Description:Whether to output warning messages concerning nodes not being found

  • min_gap1e-06A minimum gap (denominator) size

    Default:1e-06

    C++ Type:double

    Description:A minimum gap (denominator) size

  • appended_property_nameName appended to material properties to make them unique

    C++ Type:std::string

    Description:Name appended to material properties to make them unique

  • max_gap1e+06A maximum gap (denominator) size

    Default:1e+06

    C++ Type:double

    Description:A maximum gap (denominator) size

  • cylinder_axis_point_1Start point for line defining cylindrical axis

    C++ Type:libMesh::VectorValue

    Description:Start point for line defining cylindrical axis

  • quadratureFalseWhether or not to use quadrature point based gap heat transfer

    Default:False

    C++ Type:bool

    Description:Whether or not to use quadrature point based gap heat transfer

  • inactiveIf specified blocks matching these identifiers will be skipped.

    C++ Type:std::vector

    Description:If specified blocks matching these identifiers will be skipped.

  • emissivity_10The emissivity of the fuel surface

    Default:0

    C++ Type:double

    Description:The emissivity of the fuel surface

  • sphere_originOrigin for sphere geometry

    C++ Type:libMesh::VectorValue

    Description:Origin for sphere geometry

  • emissivity_20The emissivity of the cladding surface

    Default:0

    C++ Type:double

    Description:The emissivity of the cladding surface

  • active__all__ If specified only the blocks named will be visited and made active

    Default:__all__

    C++ Type:std::vector

    Description:If specified only the blocks named will be visited and made active

  • cylinder_axis_point_2End point for line defining cylindrical axis

    C++ Type:libMesh::VectorValue

    Description:End point for line defining cylindrical axis

  • orderFIRSTThe finite element order

    Default:FIRST

    C++ Type:MooseEnum

    Description:The finite element order

  • displacementsThe displacements appropriate for the simulation geometry and coordinate system

    C++ Type:std::vector

    Description:The displacements appropriate for the simulation geometry and coordinate system

Optional Parameters

References