NuclearMaterialZirconiumAlloy

under construction:Undocumented Class

The NuclearMaterialZirconiumAlloy has not been documented, if you would like to contribute to MOOSE by writing documentation, please see Documenting MOOSE. The content contained on this page explains the typical documentation associated with an action; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.

!syntax description /NuclearMaterials/ZirconiumAlloy/NuclearMaterialZirconiumAlloy

Input Parameters

  • stress_free_temperatureReference temperature for thermal eigenstrain calculation

    C++ Type:double

    Description:Reference temperature for thermal eigenstrain calculation

Required Parameters

  • temperatureCoupled temperature

    C++ Type:std::vector

    Description:Coupled temperature

  • density6551Clad density in kg-UO2/m^3

    Default:6551

    C++ Type:double

    Description:Clad density in kg-UO2/m^3

  • poissons_ratio0.3Poisson's ratio for the material.

    Default:0.3

    C++ Type:double

    Description:Poisson's ratio for the material.

  • thermal_conductivity16The thermal conductivity value

    Default:16

    C++ Type:double

    Description:The thermal conductivity value

  • specific_heat330The specific heat value

    Default:330

    C++ Type:double

    Description:The specific heat value

  • inactiveIf specified blocks matching these identifiers will be skipped.

    C++ Type:std::vector

    Description:If specified blocks matching these identifiers will be skipped.

  • active__all__ If specified only the blocks named will be visited and made active

    Default:__all__

    C++ Type:std::vector

    Description:If specified only the blocks named will be visited and made active

  • absolute_tolerance1e-10Absolute convergence tolerance for newton iteration within the radial return material

    Default:1e-10

    C++ Type:double

    Description:Absolute convergence tolerance for newton iteration within the radial return material

  • youngs_modulus7.5e+10Young's modulus of the material.

    Default:7.5e+10

    C++ Type:double

    Description:Young's modulus of the material.

  • displacementsThe displacements appropriate for the simulation geometry and coordinate system

    C++ Type:std::vector

    Description:The displacements appropriate for the simulation geometry and coordinate system

  • blockThe list of block ids (SubdomainID) that this object will be applied

    C++ Type:std::vector

    Description:The list of block ids (SubdomainID) that this object will be applied

  • max_iterations50Maximum number of newton iterations in the radial return material

    Default:50

    C++ Type:unsigned int

    Description:Maximum number of newton iterations in the radial return material

Optional Parameters

References